Windshield Wiper Blades

Windshield Wiper Blades

Removing





- Bring windshield wiper into service position. Refer to => [ Windshield Wipers, Bringing into Service Position ] Windshield Wipers, Bringing into Service Position.

- Turn off the ignition.

- Lift off wiper arm from front windshield.

- Slide retaining clip - 2 - off from wiper arm - 3 - in - direction of arrow -.

- Remove wiper blade - 1 - downward from wiper arm.

Installing






There is a risk of damaging the body.

• The driver and passenger side wiper blades are different lengths.

Install in reverse order of removal, observing the following:

- Insert joint of wiper arm in guide at wiper blade - arrow 1 -. Make sure joint is fully in position in guide.

- Lock wiper blade by sliding on retaining clip - arrow 2 -.

- Switch ignition on and activate one-touch wiping, the wipers then leave the service position.