Brake Pedal Assembly Overview, Manual Transmission

Brake Pedal Assembly Overview, Manual Transmission

CAUTION!
The path of the brake pedal must not be shortened via extra floor mats.

• Lubricate all bearing and contact surfaces with lubricant part no. Lubricant (G 000 450 02).





1 - Mounting bracket for pedal assembly

• Manual transmission illustration

2 - Pin

3 - Securing clip (spring steel)

4 - Torx flange bolt, 10 Nm

5 - Brake pedal

• Removing and installing, refer to => [ Brake Pedal ] Brake Pedal

6 - Ball socket formed in mount

7 - Mount

• For ball head of brake servo push rod

8 - Pressure or over-center spring

• When installing, note: white spring mount to pedal support, black spring mount to clutch pedal

9 - Rubber mount

10 - Clutch lever stop

• Different stops

• Black: 2.4L gasoline engines (140 mm)

• White: other engines (150 mm)

11 - Torx flange bolt, 10 Nm

12 - Clutch master cylinder

13 - Clutch pedal

14 - Securing clip (spring steel)

15 - Securing clip (spring steel)

16 - Torx flange bolt, 10 Nm

17 - Clutch sensor bracket

18 - Pin