Brake Pedal

Brake Pedal

Removing

- Remove the cover on the driver side.

- Remove brake light switch. Refer to => [ Brake Light Switch ] Service and Repair.

- Disconnect brake pedal from brake booster. Refer to => [ Brake Pedal and Brake Booster, Separating ] Brake Pedal and Brake Booster, Separating.

- Remove the bolt.

- Remove brake pedal.

Installing

Installation is the reverse of removal, with special attention to the following:

Brake Pedal and Brake Booster, Connecting

- Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.

- Adjust brake light switch/brake pedal switch. Refer to => [ Brake Light Switch ] Service and Repair.


Make sure the brakes are working correctly before driving the vehicle for the first time.