Brake Pedal

Brake Pedal

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

Removing

- Remove cover on the driver side.

- Remove the brake lamp switch. Refer to => [ Brake Light Switch ] Service and Repair.

- Remove the brake lamp sensor. Refer to => [ Brake Lamp Sensor ] Service and Repair.

- Disconnect brake pedal from brake booster. Refer to => [ Brake Booster ] Service and Repair

- Remove Torx flange bolt - 3 -.

- Loosen retainer - 1 - on right side and remove pins - 5 -.





- Remove brake pedal.

Installing

Installation is the reverse of removal, with special attention to the following:

Brake Pedal and Brake Booster, Connecting

- Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.

- Brake light switch, installing. Refer to=> [ Brake Light Switch ] Service and Repair

- Install the brake lamp sensor. Refer to => [ Brake Lamp Sensor ] Service and Repair.