Socket Illumination Bulb, 12V Socket

Socket Illumination Bulb, 12V Socket

Special tools, testers and auxiliary items required

• Release Tool for Cigarette Lighter (T40148)

Removing






- Vehicles with Multi Media Interface (MMI) basic equipment: Remove the center console cover.

- Vehicles with MMI comfort equipment: Remove the multimedia control head (E380).

- Unclip the electrical connector - 2 - from the mount.

- Disconnect the electrical connector - 1 - and secure a long cord on it.

• The cord is attached to the connector so the electrical wire for the 12V socket - 3 - can be pulled through when installing without removing the center console.

- The release tabs - 2 - on the (T40148) must engage in the openings in the 12V socket (U5) - item 3 - - arrow - and the threaded pin - 1 - must slide down as far as the stop.






- Open the cover - 1 - on the 12 V socket and hold it in this position.






- Slide the (T40148) into the 12V socket as far as the stop.

- Rotate the thumb wheel - 2 - on the (T40148) clockwise as far as the stop.

• The piston - 2 - is pulled upward and the release tabs - 1 - on the (T40148) spread - arrows -.






- Remove the 12V socket from the illumination ring with the socket illumination bulb (L42) using the (T40148).

- Disconnect the electrical connector.

- Release the clips in the - direction of the arrows -.






- Remove the illumination ring - 1 - with the socket illumination bulb from the center console storage compartment - 2 -.

Installing






Install in reverse order of removal, observing the following:

- Remove the support - 1 - on the (T40148).

- Slide the piston down and hold it in place.

- Rotate the thumb wheel - 4 - on the (T40148) counterclockwise - arrow -. The release tabs - 2 - on the 12V socket - 3 - will loosen and the (T40148) can be removed.

- Vehicles with MMI basic equipment: Install the center console cover.

- Vehicles with MMI comfort equipment: Install the multimedia control head.