Air Duct For Glove Compartment Cooling

Air Duct For Glove Compartment Cooling

Removal






- Remove the glove compartment.

- Remove the footwell vent on the front passenger side. Refer to => [ Right Footwell Vent Air Guide - Front Passenger Side ] Right Footwell Vent Air Guide - Front Passenger Side.

- Release the securing tab - 2 - and pull the air guide - 3 - down out of the mount - arrow -.

- Remove the air guide hose - 1 - at the connector.

Installation






Installation is done is reverse order, observe the following:

• If the foam seal is damaged or not correctly positioned with respect to the glove compartment, noise can occur at the connection point.

• If the air guide hose is not correctly attached to the A/C unit, noises can occur at the connecting point.

- Replace a damaged or defective foam seal - 3 -.

- The air guide hose - 1 - can only be attached in one position - arrow - to the stop on the connector - 2 -.

- The air guide must be pressed on until it engages audibly.

- If the air guide hose - D - at the connector - B - is loose, it must be secured with a hose clamp - C -. Hose clamp, refer to Electronic Parts Catalog (ETKA).






- Install the footwell vent on the front passenger side. Refer to=> [ Right Footwell Vent Air Guide - Front Passenger Side ] Right Footwell Vent Air Guide - Front Passenger Side.