Headlamp Washer System Spray Nozzle

Headlamp Washer System Spray Nozzle

Removing






- Pull the spray nozzle telescope - 2 - all the way out of the bumper cover.

• Hold the telescope in the pulled-out position.

- Open the side retainers - arrows - and remove the spray nozzle - 1 - from the telescope.

- Let the telescope go back into the mount slowly.

- Remove the cover if the spray nozzle is being replaced.

Installing

Install in reverse order of removal. Note the following:

- Replace the O-ring - 3 - if the same spray nozzle is being installed again.