Washer Fluid Reservoir Filler Neck

Washer Fluid Reservoir Filler Neck

Special tools, testers and auxiliary items required

• Drip Tray

Observe notes on contact corrosion => [ Contact Corrosion ] Service Precautions.

Removal






- Place a drip tray under the windshield washer fluid reservoir.

- Remove the plenum chamber cover.

- Remove the screws - arrows - and remove the connection - 1 - with the filler tube from the windshield washer fluid reservoir to the right side through the opening in the body.

Installation






• Tightening specification, refer to => [ Windshield Washer Fluid Reservoir, Lines and Nozzle Overview ] Windshield Washer Fluid Reservoir, Lines and Nozzle Overview.

Install in reverse order of removal, observing the following:

- Slide the grommet - 2 - all the way onto the filler tube connection - 1 -.

• The tab - 3 - must fit into the opening - arrow - on the filler tube.

- Insert the filler connection into the windshield washer fluid reservoir.

• Make sure the O-ring is not crushed when sliding it into the washer fluid reservoir.