Brake Pedal

Brake Pedal

Removing

- Move the seat all the way back as far as it will go.

- Switch ignition off.

- Remove the storage compartment under the instrument panel on the driver side.

- Disconnect the connector - A - from the left footwell vent temperature sensor (G261) - B -.





- Remove the bolt - D -.

- Remove the footwell vent - E -.

- Disconnect the connector from the brake lamp switch (F).

- Remove the brake lamp switch. Refer to => [ Brake Lamp Switch ] Service and Repair

- Disconnect brake pedal from brake booster => [ Brake Pedal and Brake Booster, Disconnecting and Connecting ] Brake Pedal and Brake Booster, Disconnecting and Connecting

• If possible, leave the brake pedal stop installed; it could break the mount for the brake lamp switch if the brake pedal is released too quickly.

- Remove the bolt - 3 -.





• Remove both clips - 1 -.

- Remove both clips from the bolt.

- Remove the bolt - 5 - from the brake pedal - 2 - and bracket - 4 -.

- Remove brake pedal.

If possible, leave the brake pedal stop installed; it could break the mount for the brake lamp switch if the brake pedal is released too quickly.

Installing

- Install the brake pedal in the pedal bracket.

- Remove the bolt - 5 - through the brake pedal - 2 - and bracket - 4 -.





- Install both clips - 1 - on the bolt.

• Make sure the left and right clips - 1 - fit securely inside the groove on the bolt.





- Install the bolt - 3 - and tighten to 8 Nm.

Brake Pedal and Brake Booster, Connecting

- Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.

- Install the brake lamp switch. Refer to => [ Brake Lamp Switch ] Service and Repair.

- Install the footwell vent - E -.





- Install and tighten the bolt - D -.

- Connect the connector - A - to the left footwell vent temperature sensor - B -.

- Install the storage compartment under the instrument panel on the driver side.

• Make sure the brake lamp switch is working correctly before driving the vehicle.

• Make sure the brakes are working correctly before driving the vehicle for the first time.