Cooler Assembly Overview

Cooler Assembly Overview






1 Wiring harness

2 Light Emitting Diode (LED)

• For cooler lighting

3 Trim

• For cooler compressor

• Removing and Installing, refer to => [ Cooler Compressor Trim ] Cooler Compressor Trim

4 Switch

• For cooler compressor

• Removing and Installing, refer to => [ Cooler Compressor Switch ] Cooler Compressor Switch

5 Bolt

• Quantity: 3

• 3 Nm

6 Cover

• For cooler (J698)

• Removing and Installing, refer to => [ Cooler Lid ] Cooler Lid

7 Lower wire shelf

8 Upper wire shelf

9 Nut

• 3 Nm

10 Right retainer

• For attachment in the luggage compartment

• Removing and Installing, refer to => [ Cooler Bracket ] Cooler Bracket

11 Bolt

• Quantity: 2

• 3 Nm

12 Bolt

• Quantity: 2

• Tightening sequence => [ Cooler - tightening specification
and sequence ]

13 Left retainer

• For attachment in the luggage compartment

• Removing and Installing, refer to => [ Cooler Bracket ] Cooler Bracket

14 Bolt

• Quantity: 2

• 3 Nm

15 Nut

• 3 Nm

16 Cooler (J698)

• Unit with compressor

• Removing and Installing, refer to => [ Cooler J698 ] Cooler J698

17 Seal

• Replace if damaged

• Removing and Installing, refer to => [ Cooler Lid Seal ] Cooler Lid Seal

18 Bolt

• Quantity: 2

• Tightening sequence => [ Cooler - tightening specification
and sequence ]

Cooler - tightening specification and sequence





- Tighten bolts in the sequence - 1, 2 - to 3 Nm.

Positive cable cover - tightening specification





- Tighten bolts - 1 - and - 3 - to 3 Nm.