12 Volt Socket

12 Volt Socket

Special tools, testers and auxiliary items required

• Release Tool (T40148)

Removing






- The release tabs - 2 - on the release tool (T40148) must engage in the openings in the 12 volt socket - 3 - - arrow - and the threaded pin - 1 - must slide down as far as the stop.

- Open the mount cover - 2 - and hold it in that position.






- Slide the (T40148) as far as the stop into the 12 volt socket - 3 -.

- Rotate the thumbwheel - 1 - on the (T40148) clockwise as far as the stop.

• The piston - 2 - is pulled upward and the release tabs - 1 - on the (T40148) spread - arrows -.






- Remove the 12 volt socket from the luggage compartment trim panel.

- Disconnect the electrical connector.

Installing






Install in reverse order of removal. Note the following:

- Remove the support - 1 - on the (T40148).

- Slide the piston down and hold it in place.

- Rotate the thumbwheel - 4 - on the (T40148) counterclockwise - arrow -. This loosens the release tabs - 2 - on the 12 volt socket- 3 - so the (T40148) can be removed.