Converter With Socket, 12 Volt - 110 Volt (U13)

Converter With Socket, 12 Volt - 110 Volt (U13)

Removing






- Remove the cupholder..

- Remove the bolts - arrows -.

- Remove the Converter with socket, 12 volt -110 volt - 2 - from the mount - 1 -.

- Release the tabs - 3 - and disconnect the connector - 4 - toward the rear.

- Open the mount - 1 - for the 110 volt socket.






- Release the mount at the top and push it slightly down - arrow A - and then move it to the side - arrow B -.

- Remove the mount from the side trim on the rear center console.

- Releases the left and right tab - 1 - and remove the 110 volt socket - 3 - from the mount - 2 -.






- Remove the voltage converter and the 110 volt socket.

Installing

• Tightening specification. Refer to=> [ Cigarette Lighter, 12 Volt Outlet and 110 Volt Outlet (U13) Overview ] Service and Repair.

Install in reverse order of removal. Note the following:

- Install the cupholder..