Signal Horn Bracket

Signal Horn Bracket

Removing






- Remove the horns. Refer to => [ Signal Horns ] Signal Horns.

- Remove the clamp and then remove the windshield washer fluid hose - 1 -.

- Push the release catch in - direction of arrow A -, disconnect the connector - 4 - in - direction of arrow B - and remove the connector from the retainer - 5 -.

- Remove bolt - 2 -.

- Remove the bracket - 3 - for the horns.

- Free up the wiring harness for the horns and the windshield washer fluid hose.

- Remove the bracket upward.

Installing

• Tightening specification. Refer to=> [ Signal Horns Overview ] Signal Horns Overview.

Install in reverse order of removal. Note the following:

- When connecting washer fluid line, ensure securing clip engages audibly in washer fluid line connection.

- Install the horns. Refer to => [ Signal Horns ] Signal Horns.