Signal Horns

Signal Horns

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.

Removing






- Switch off ignition and remove ignition key.

- Remove the lock carrier cover.

Left Horn

- Remove bolt - 2 -.

- Unclip the bracket - 1 - from the radiator grille.

Continuation for All

- Remove the nut - 3 -.

- Remove the horn - 4 - from the bracket.

- Disconnect the electrical connector - 5 -.

Installing

• Tightening specification. Refer to => [ Signal Horns Overview ] Signal Horns Overview.

Install in reverse order of removal. Note the following:

- Install the lock carrier cover.