Electro-Mechanical Parking Brake (E538) and -AUTO HOLD- (E540) Buttons

Electro-Mechanical Parking Brake (E538) and -AUTO HOLD- (E540) Buttons

Removing






- Remove the front center console cover.

- Release the clips where identified with - arrows - using a feeler gauge and remove the electro-mechanical parking brake button (E538) / -AUTO HOLD- button (E540) - 2 - from the center console - 1 -.

- Open the clips - arrows - and remove the electromechanical parking brake button / -AUTO HOLD- button - 3 - from the center console - 4 -.

• Remove the center console if it is not possible to remove the button as described.

Installing

Install in reverse order of removal, observing the following:

- Install the front center console cover.