Turn Signal Lamp: Service and Repair

Exterior Mirror Turn Signal Lamps

Removing






- Remove the exterior rear view mirror housing..

- Disconnect the electrical connector - 3 -.

- Remove screws - 1 - and - 4 -.

- Remove the turn signal bulb - 5 - from the housing - 2 - - arrow -.

Installing






• Tightening specifications, refer to => [ Exterior Rear View Mirror Turn Signals Overview ] Service and Repair.

Install in reverse order of removal, observing the following:

• The entire exterior mirror turn signal must be replaced if an LED is faulty.

- Install the guide - 3 - into the mount - arrow -.

- Install the turn signal - 2 - into the housing. Make sure the guide nut fits into the guide - 1 -.

- Install the exterior rear view mirror housing..