Washer Fluid Level Switch: Service and Repair

Windshield Washer Fluid Level Sensor

Special tools, testers and auxiliary items required

• Drip tray

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing

- Switch off ignition and remove ignition key.

- Remove left front wheel.

- Remove left front wheel housing liner.

- Disconnect the electrical connector - 1 -.





- Place a drip tray under the windshield washer fluid reservoir.

- Remove the windshield washer fluid level sensor (G33) - item 3 - from the washer fluid reservoir - 4 -.

Installing

Install in reverse order of removal, observing the following:

- Check the sealing grommet - 2 - for damage.

- Install left front wheel house liner.