Brake Caliper: Service and Repair
Exploded View:
- Remove front wheels.
- Draw off brake fluid with a syringe reserved exclusively for brake fluids.
- Disconnect brake line.
Installation note:
- Bleed brakes. Service and Repair
- Unscrew caliper mounting bolts (1).
Installation note:
- Tightening torque: 110 Nm.
- Pull off brake pad wear indicator plug on left side.
- Pull off brake caliper toward rear.
Installation note:
- Make sure of correct location of brake pad wear indicator wires with tab of dust cap - rubbing of the wires on the wheel rim must always be prevented.
- Reverse procedure to install.
NOTE: For additional information see Removal, and Installation Notes. Fundamentals and Basics