P0340

System/Component
Phase sensor (camshaft)

Fault Code
P0340

Fault Type
Plausibility Yes
Signal No
Minimum Threshold No
Maximum Threshold No

Monitoring Method
comparison to engine position sensor

Signal Type
ECM internal signal/value computation or comparison

Operating Range
yes/no

Time Length and Frequency for Monitoring/Diagnosis
once per revolution/permanent

Criteria for storing fault code
fault during 2 trips

Criteria for illuminating the MIL
fault during 2 trips and end of 2nd trip

Criteria used for determining out of range values and input component rationality check
UBATT No
Ground No
Disconnect No

Electronic Control Module (ECM)
Fault if crankshaft cranks and no camshaft signal occurs