Throttle Body: Service and Repair

13 54 030 - Removing and installing/sealing throttle assembly (M54)





Necessary preliminary tasks:
- Switch off ignition
- Disconnect battery negative lead from battery and lay to one side
Follow instructions for disconnecting and connecting battery Instructions for Disconnecting and Connecting Battery.
- If fitted (E85): remove sound generator
- Remove air intake hose Service and Repair





Release screws (1) of cable duct mounting.
Place cable channel to one side.





Unlock plug (1) and detach from throttle assembly (3).
Release screws (2) and remove throttle assembly (3).





Installation:
Replace sealing ring (1) on throttle assembly (2).