Removing and Installing/Replacing Brake Pedal

35 21 000 - Removing and installing/replacing brake pedal





Necessary preliminary tasks:
- Remove pedal trim 51 45 185 Removing and Installing/Replacing Panel For Pedals





Disconnect return spring (1).
Release screw (2) and remove holder (3).





Remove locking clip (1), disconnect pin (2) and pull out.
Remove locking clip (3) and feed out brake pedal (4).

Installation:
Replace locking clip.
The locking clip must be seated with both legs in the pin groove.





Installation:
Check bearing bushes (1) and replace if necessary.

Lightly grease bearing bushes (1).