Fluid Pan: Service and Repair

24 11 001 - Removing and installing/sealing or replacing transmission fluid sump (A5S 360R / 390R)





Important!
After completion of work, check transmission fluid level Procedures.
Use only the approved transmission fluid.

Failure to comply with this requirement will result in serious damage to the automatic transmission!





Remove oil drain plug (1).
Tightening torque 24 11 6AZ Transmission Housing, Transmission Oil Sump.
Drain automatic transmission fluid.
Unscrew all bolts.
Remove transmission sump (2).

Installation:
Replace sealing ring on oil drain plug.
Clean sealing faces of transmission fluid sump.





Fit new gasket on transmission fluid sump.
Clean magnet (1) and insert in fluid sump again.
Mount transmission fluid sump.
Insert all screws until contact is made with screw head in each case.

Important!
Tighten down screws, not in diagonal sequence but rather in order, 1x to specified torque.
Tightening torque 24 11 5AZ Transmission Housing, Transmission Oil Sump.