Removing and Installing / Replacing Left or Right Underbody Panelling
51 47 ... - Removing and installing/replacing left or right underbody panelling
Necessary preliminary tasks:
M5:
- If necessary, slacken tension strut to tunnel screw connection 51 71 482 - Removing and installing/replacing left or right tension strut (on rear axle) (M5/M6)
Note:
Hexagon screw in the tunnel bridge area is designed with different washer diameters.
Release plastic nuts.
Release screws (1 to 3).
If necessary, release screw (5).
Release screws (4) and remove underbody panelling in direction of arrow.
Installation:
Replace damaged plastic nuts.