Auxiliary Cabin Heater Fuel Hose/Line: Service and Repair

64 12 ... - Install fuel intake line with filter





Important!
Observe country-specific safety regulations.
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!





Recycling
Fuel escapes when fuel lines are detached. Have a suitable collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.





Necessary preliminary tasks:
- Remove rear seat bench Removing and Installing/Replacing Left or Right Rear Seat (Through-Loading)





Note:
(1) - Fuel intake line without filter
(2) - Fuel intake line with filter





Fold back floor panelling (1) on right.
Release screws (2) and remove cover (3) from right side of fuel tank.





Disconnect plug connection (1).





Unfasten hose clip (1).
Pull fuel line (2) out of fuel intake line.
Unfasten hose clip (3).
Pull fuel intake line (4) out of connection piece in service cover.
Install new fuel intake line with filter.






Installation Note:
Push fuel line (1) up to beading (2) in grommet of fuel intake line (3).
Fuel line (1) and fuel intake line (3) must be pushed into the grommet so that they join.





Installation Note:
Secure spacer (1) on fuel intake line.

Note:
Connection beading (2) and tabs (3) of hose clips must be positioned horizontally.