Wiper Motor: Service and Repair

61 61 270 - Removing and installing or replacing bracket for windscreen wiper system complete with motor





Necessary preliminary tasks:
- Remove cowl panel cover 51 13 115 Removing And Installing/Replacing Cowl Panel Cover





Unfasten plug connection (1) and disconnect.
Unclip and remove clamping lever (2).

Installation:
If necessary, replace clamping lever (2).

Release screws (3).

Tightening torque 61 61 1AZ [1][2]Specifications.
Remove wiper bracket (4) upwards.

Installation:
Make sure wiper bracket (4) is exactly seated.





Installation:
Before fitting the wiper arms, allow the windscreen wiper motor to run into the rest position.
To ensure that the windshield wiper system functions properly, check/adjust Testing and Inspection the contact angle of the wiper arms to the windshield.