Radio/Stereo: Service and Repair
REMOVAL PROCEDURERadio Replacement: Removal Procedure:
1. Set the parking brake.
2. Move the gear selector to the full rear position (1st gear).
3. Remove the I/P bezel.
4. Remove the radio (2) mounting screws (1).
Radio Replacement: Removal Procedure:
5. Remove the radio (2) from the HVAC control head mounting bracket (1).
Radio Replacement: Removal Procedure:
6. Disconnect the antenna connector (1).
7. Disconnect the wiring harness connector (2).
INSTALLATION PROCEDURE
Radio Replacement: Installation Procedure:
1. Connect the wiring harness connector (2).
2. Connect the antenna connector (1).
Radio Replacement: Installation Procedure:
3. Install the radio (2) into the HVAC control head mounting bracket (1).
Radio Replacement: Installation Procedure:
4. Install the radio mounting screws (1) until fully seated and not stripped.
5. Install the I/P bezel.