Ash Tray: Service and Repair

Ashtray Replacement

Removal Procedure




1. Set the parking brake and move the shifter selector to the full rear position.
2. Open the ashtray.
3. Release the outer tray cover from the right side of the assembly and remove.




4. Remove the screw from the rear of the ashtray.
5. Remove the ashtray from the instrument panel.

Installation Procedure




1. Install the ashtray to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screw to the rear of the ashtray.

Tighten the screw to 2 Nm (18 lb in).




3. Install the outer tray cover to the ashtray assembly.
4. Close the ashtray.
Install the shifter selector to the full forward position and release the parking brake.