Antenna Amplifier: Service and Repair

Television Antenna Amplifier Replacement

Removal Procedure





1. Remove the right rear sail panel. Refer to Sail Panel Replacement (Service and Repair) .
2. Remove the fasteners (2) securing the amplifier (1) to the sail panel.
3. Disconnect the coaxial cable.
4. Disconnect the electrical connector.



Installation Procedure






Important: Ensure that the module coaxial cable connectors are pointing away from each other.


1. Reconnect the electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the amplifier (1) to the sail panel using the fasteners (2).

Tighten the fasteners to 9 N.m (80 lb in).

3. Connect the coaxial cable to the amplifier.
4. Reinstall the sail panel trim. Refer to Sail Panel Replacement (Service and Repair) .