Antenna Amplifier: Service and Repair

Television Antenna Amplifier Replacement

Removal Procedure




1. Remove the right rear sail panel. Refer to Sail Panel Replacement (Service and Repair).
2. Remove the fasteners (2) securing the amplifier (1) to the sail panel.
3. Disconnect the coaxial cable.
4. Disconnect the electrical connector.

Installation Procedure





Note: Ensure that the module coaxial cable connectors are pointing away from each other.

1. Reconnect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the amplifier (1) to the sail panel using the fasteners (2)and tighten to 9 Nm (80 lb in).
3. Connect the coaxial cable to the amplifier.
4. Reinstall the sail panel trim. Refer to Sail Panel Replacement (Service and Repair).