Antenna, Navigation: Service and Repair

Cellular and Navigation Antenna Assembly Replacement

Removal Procedure

1. Remove the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Service and Repair).




2. Disengage the retaining clips from the windshield bracket by grasping the antenna assembly at the windshield and sliding the assembly towards the passenger side of the vehicle.
3. Lower the antenna coaxial cable from the windshield header.
4. Disconnect the coaxial leads from the antenna base, and remove the antenna from the vehicle.

Installation Procedure

1. Position the antenna assembly to the windshield and connect the coaxial leads to the antenna.
2. Route the antenna coaxial cable to the windshield header.




3. Align the antenna assembly to the windshield bracket retaining clips. Push the assembly to the driver side of the vehicle to engage the retainers.
4. Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Service and Repair).