Vacuum Reservoir HVAC: Service and Repair

VACUUM TANK REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the vacuum hoses from the vacuum tank.




2. Remove the screws that secure the vacuum tank to the HVAC module.
3. Remove the vacuum tank.

INSTALLATION PROCEDURE




1. Install the vacuum tank to the HVAC control module.
2. Install the screws to the vacuum tank.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 1.5 N.m (13 lb in).




3. Connect the vacuum hoses to the vacuum tank.