Splash Guard: Service and Repair

Wheelhouse Splash Shield Replacement

Removal Procedure





Notice: Refer to Vehicle Lifting and Jacking Notice Vehicle Lifting and Jacking Notice in Cautions and Notices.

1. Raise and suitably support the vehicle.
2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation Service and Repair in Tires and Wheels.
3. Remove the front mud guard. Refer to Rear Mud Flap Guard Replacement Service and Repair in Exterior Trim.
4. Remove the screws and the front wheel well splash shield.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

1. Install the screws and the front wheel well splash shield.

Tighten the front wheel well splash shield screws to 2 Nm (18 lb in).

2. Install the front mud guard. Refer to Rear Mud Flap Guard Replacement Service and Repair in Exterior Trim.
3. Install the front wheel. Refer to Tire and Wheel Removal and Installation Service and Repair in Tires and Wheels.
4. Lower the vehicle.