Brake Fluid Reservoir: Service and Repair

Master Cylinder Reservoir Replacement

Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning Brake Fluid Irritant Warning.


Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution Brake Fluid Effects on Paint and Electrical Components Caution.

1. Remove the front suspension strut housing brace. Refer to Front Suspension Strut Housing Brace Replacement .




2. Remove the brake master cylinder reservoir bolts (1).




3. Carefully pull the master cylinder reservoir (1) straight upward and remove the master cylinder reservoir from the master cylinder.




4. Remove and discard the brake master cylinder reservoir seals (1).

Installation Procedure

1. Lightly lubricate the master cylinder reservoir seals with GM approved brake fluid from a clean, sealed brake fluid container. Refer to Adhesives, Fluids, Lubricants, and Sealers [1][2]Specifications.




2. Install the brake master cylinder reservoir seals (1).




3. Carefully install the master cylinder reservoir (1) to the master cylinder.





Caution: Refer to Fastener Caution Fastener Caution.

4. Install the brake master cylinder reservoir bolts (1) and tighten to 8 Nm (71 lb in).
5. Install the front suspension strut housing brace. Refer to Front Suspension Strut Housing Brace Replacement .