Drive Belt: Service and Repair

Drive Belt Replacement

Special Tools

EN 6349 - Locking Pin

For equivalent regional tools, refer to Special Tools Special Tools.

Removal Procedure

1. Remove the front wheelhouse liner Inner front extension. Refer to Front Wheelhouse Liner Inner Front Extension Replacement .





2. Release tension to the drive belt tensioner by rotating counterclockwise (1) and lock with EN 6349 - pin(2).





3. Remove the drive belt (1).

Installation Procedure





1. Install the drive belt (1).





2. Release tension to the tensioner by rotating counterclockwise (1).

Note:
Allow tensioner to slide back slowly.

3. Remove EN 6349 - pin(2).

4. Apply tension to the tensioner clockwise (1).

5. Install the front wheelhouse liner Inner front extension. Refer to Front Wheelhouse Liner Inner Front Extension Replacement .