Clutch Assembly Adjustment (14 Inch Valeo Cable)

Clutch Assembly Adjustment (14 Inch Valeo Cable)

1. Ensure the internal clutch adjustment is correct prior to performing this adjustment procedure
2. Remove the retainer from the swivel.
3. Remove the swivel and cable from the clutch lever.
4. Loosen and position both nuts away from each other.
5. With the clutch lever free standing, adjust the adjusting nut to allow the swivel to align with the clutch lever swivel hole.
6. Using a three eighths inch drive socket extension as a gauge, position the drive socket extension next to the swivel.
7. Position the adjusting nut down the threads next to the drive socket extension.
8. Ensure the swivel is free from the shift lever.
9. Remove the drive socket extension.
10. Position the inner adjusting nut up the threads moving the swivel toward the outer adjusting nut.
11. Tighten both nuts.

Tighten the nuts to 40 Nm (30 lb ft)

12. Position the swivel into the clutch lever hole.
13. Secure the swivel to the clutch lever with the retainer.
14. Check the clutch system for normal operation.