Clutch Assembly Adjustment (14 Inch Valeo Internal)

Clutch Assembly Adjustment (14 Inch Valeo Internal)

1. Measure the distance from the flywheel housing to the release bearing pads with 25 Nm (6 lb) of force pulling the bearing toward the transmission.

1. If 99.9 mm (0.750 in) on transmissions without a clutch brake, no adjustment is necessary.
2. If 92.7 mm (0.50 in) on transmissions with a clutch brake, no adjustment is necessary.
3. If the release bearing position is incorrect, loosen the lock rings and turn the adjusting nut in order to achieve the proper distance.

* Use appropriate spanner wrench to loosen and tighten the lock nuts.
* Tighten the lock ring securely against the release lever spider.

2. Verify that adjustment clearance off 99.9 mm (0.750 in) on transmissions without a clutch brake, and 92.7 mm (0.50 in) on transmissions with a clutch brake, has been maintained, after tightening lock nuts.