Knee Bolster Replacement - Luxury

Knee Bolster Replacement (Luxury)

Removal Procedure




1. Remove the IP cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement).
2. Move the IP extension rearwards. Refer to Instrument Panel Extension Replacement (Luxury) (Instrument Panel (IP) - Extension Replacement - Luxury)Instrument Panel Extension Replacement (Non-Luxury) (Instrument Panel (IP) - Extension Replacement - Non-Luxury)Instrument Panel Extension Replacement (Pro) (Instrument Panel (IP) - Extension Replacement - Pro).




3. Remove the knee bolster screws.
4. Unsnap the top of the knee bolster from the IP assembly

Installation Procedure




1. Snap the top of the knee bolster into the IP assembly.
Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.

2. Install the knee bolster screws.

Tighten the screws to 2 Nm (18 lb in).

3. Install the IP cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement).
4. Install the /P extension to the IP. Refer to Instrument Panel Extension Replacement (Luxury) (Instrument Panel (IP) - Extension Replacement - Luxury)Instrument Panel Extension Replacement (Non-Luxury) (Instrument Panel (IP) - Extension Replacement - Non-Luxury)Instrument Panel Extension Replacement (Pro) (Instrument Panel (IP) - Extension Replacement - Non-Luxury).