Multifunction Turn Signal Lever Replacement - On Vehicle

Multifunction Turn Signal Lever Replacement - On Vehicle

Removal Procedure




1. Move the lever (1) to the OFF or the center position.
2. If vehicle is equipped with cruise control proceed as follows:

1. Remove the access cover (2) by pulling straight out.
2. Disconnect the electrical connector (4).

3. Pull the lever straight out of the turn signal switch.

Installation Procedure




1. Push the lever (1) into the turn signal switch.
2. If vehicle is equipped with cruise control proceed as follows:

1. Connect the electrical connector (4).
2. Install the access cover (2).