Knee Bolster Replacement - Right

KNEE BOLSTER REPLACEMENT - RIGHT

REMOVAL PROCEDURE
1. Remove the instrument panel extension.




2. Remove the screws that retain the knee bolster to the instrument panel.
3. Pull back on the knee bolster in order to release the retainers from the instrument panel.
4. Remove the knee bolster.

INSTALLATION PROCEDURE
1. Install the knee bolster.




2. Install the knee bolster to the instrument panel:
2.1. Align the retainers.
2.2. Press the panel into place.
3. Install the screws that retain the bolster to the instrument panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the knee bolster screws to 8 N.m (71 lb in).

4. Install the instrument panel extension.