Ignition Coil: Service and Repair

REMOVAL PROCEDURE
1. Remove the engine cover.




2. Disconnect the spark plug wires at the ignition coils.




3. Disconnect the ignition coil harness connector.




4. Remove the ignition coil mounting bolts.




5. Remove the ignition coil.

INSTALLATION PROCEDURE




1. Install the ignition coil to the bracket.




2. Install the ignition coil mounting bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the ignition coil mounting bolts to 8 N.m (71 lb in).




3. Connect the ignition coil harness connector.




4. Connect the spark plug wires at the ignition coils.
5. Install the engine cover.