Knee Bolster Replacement - Right
Knee Bolster Replacement - Right
Removal Procedure
Caution: Refer to SIR Caution in Cautions and Notices.
1. Disable the SIR. Refer to SIR Disabling and Enabling Zone 5 in SIR.
2. Remove the bolts (2) from the lower edge of the instrument panel passenger knee bolster panel (1).
3. Pull on the I/P passenger knee bolster panel (1) in order to disengage the retainers.
4. Remove the I/P passenger knee bolster panel (1) from the vehicle.
5. Inspect the I/P passenger knee bolster panel (1) for broken or missing retainers.
Replace the retainers as needed.
Installation Procedure
1. Position the I/P passenger knee bolster panel to the vehicle.
2. Align the retainers on the I/P passenger knee bolster panel (1) with the slots at the top of the knee bolster bracket.
3. Press on the I/P passenger knee bolster panel (1) in order to engage the retainers.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the knee bolster panel (1) bolts (2).
Tighten the bolts to 3.5 N.m (31 lb in).
5. Enable the SIR. Refer to SIR Disabling and Enabling Zone 5 in SIR.