Knee Bolster Bracket Replacement - Right
Knee Bolster Bracket Replacement - Right
Removal Procedure
Caution: Refer to SIR Caution in Cautions and Notices.
1. Remove the knee bolster trim panel. Refer to Knee Bolster Replacement - Right (Knee Bolster Replacement - Right) .
2. Remove the body control module (BCM). Refer to Body Control Module Replacement in Computer/Integrating Systems.
3. Remove the nuts (1) securing the knee bolster bracket to the instrument panel (I/P).
4. Remove the knee bolster bracket (2).
Installation Procedure
1. Align the knee bolster bracket (2) to the I/P.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the nuts (1).
Tighten the nuts (1) to 10 N.m (88 lb in).
3. Install the knee bolster trim panel. Refer to Knee Bolster Replacement - Right (Knee Bolster Replacement - Right) .
4. Install the body control module. Refer to Body Control Module Replacement in Computer/Integrating Systems.