Mobile Entertainment Data Cartridge Player Lower Housing Replacement

Mobile Entertainment Data Cartridge Player Lower Housing Replacement

Removal Procedure




1. Turn the latch assembly counterclockwise on both sides of the mobile entertainment assembly. Lower the mobile entertainment assembly.
2. Disconnect the electrical connectors from the mobile entertainment assembly. Remove the mobile entertainment assembly from the vehicle.




3. Disconnect the door switch electrical connector from the mobile entertainment data cartridge player.
4. Remove the screws from the upper housing.




5. Remove the upper housing.




6. Remove the upper and lower door assembly from the lower housing.




7. Remove the door wire switch from the lower housing.

Installation Procedure




1. Install the door switch to lower housing.




2. Install the upper and lower door assembly to lower housing.
3. Install the upper housing.

Notice: Refer to Fastener Notice.




4. Install the upper housing screws.

Tighten the screws to 2 N.m (18 lb in).




5. Connect the door switch electrical connector to the mobile entertainment data cartridge player.
6. Connect the electrical connectors to the mobile entertainment housing.
7. Turn the latch assembly clockwise on both sides of the mobile entertainment housing. Latch the mobile entertainment assembly to the roof rail.