Charge Air Cooler Inlet Pipe Replacement

Charge Air Cooler Inlet Pipe Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement (Front Bumper Fascia Extension Replacement) .
3. Loosen the charge air cooler inlet pipe clamp (1).
4. Remove the charge air cooler inlet pipe (2) from the charge air cooler (3).




5. Loosen the charge air cooler clamp (1).
6. Loosen the charge air cooler inlet pipe (2) from the vehicle.



Installation Procedure






Important: Remove any oil film from inside the pipes.


1. Install the charge air cooler pipe (2) and tighten the charge air cooler inlet pipe clamp.





Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the charge air cooler inlet pipe (2) to the charge air cooler (3).

Tighten the clamp to 5 N.m (44 lb in).

3. Install the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement (Front Bumper Fascia Extension Replacement) .