Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure

1. Remove the left cowl side panel. Refer to Cowl Side Trim Panel Replacement (Service and Repair).




2. Remove the park brake indicator switch electrical connector.
3. Remove the park brake indicator switch screw.
4. Remove the parking brake indicator switch.

Installation Procedure

1. Install the park brake indicator switch.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the park brake indicator switch screw.

Tighten the screw to 3 N.m (27 lb in).




3. Install the park brake indicator switch electrical connector.
4. Install the left cowl side panel. Refer to Cowl Side Trim Panel Replacement (Service and Repair).