Daytime Running Lamp (DRL) Ambient Light Sensor Replacement

Daytime Running Lamp (DRL) Ambient Light Sensor Replacement

Removal Procedure

1. Remove the instrument panel (I/P) upper trim. Refer to Instrument Panel Upper Trim Panel Replacement Instrument Panel Upper Trim Panel Replacement.




2. Remove the security system LED. Refer to LED Indicator Replacement - Vehicle Security System Removal and Replacement.
3. Twist the daytime running lamp (DRL) sensor counterclockwise in order to remove the sensor from the I/P upper trim.
4. Remove the DRL sensor from the wiring harness.

Installation Procedure




1. Install the DRL sensor to the wiring harness.
2. Position the DRL sensor in the I/P upper trim and twist the sensor to secure.
3. Install the security system LED. Refer to LED Indicator Replacement - Vehicle Security System Removal and Replacement.
4. Install the I/P upper trim. Refer to Instrument Panel Upper Trim Panel Replacement Instrument Panel Upper Trim Panel Replacement.