Flex Plate: Service and Repair
Engine Flywheel Replacement
Special Tools
J-37096 - Flywheel Holder
Removal Procedure
1. Remove the automatic transaxle. Refer to Transmission Replacement (M15) Transmission Replacement (M15).
2. Use the J-37096 - Flywheel Holder to secure the flywheel in order to prevent the crankshaft from rotating.
3. Loosen the flywheel bolts.
4. Remove 5 of the 6 flywheel bolts leaving one bolt at the top of the crankshaft.
5. Grip the flywheel and remove the remaining bolt. Do not drop the flywheel when removing the final bolt.
6. Remove the engine flywheel.
7. Clean the engine flywheel bolt threads and bolt holes.
Installation Procedure
1. Position the flywheel to the crankshaft.
2. Install the flywheel bolts finger tight.
3. Use the J-37096 - Holder to secure the flywheel in order to prevent the crankshaft from rotating.
Caution: Refer to Fastener Caution Fastener Caution.
4. Tighten the flywheel bolts and tighten to 70 Nm (52 lb ft).
5. Install the automatic transaxle. Refer to Transmission Replacement (M15) Transmission Replacement (M15).