Inspection Procedure 1

INSPECTION PROCEDURE 1: Brake Drag
DIAGNOSIS
STEP 1. Check the incomplete release of parking brake.
Q:Is there a fault?
YES:Correct it. Then go to Step 5.
NO:Go to Step 2.
STEP 2. Check the incorrect parking break adjustment.
Q:Is there a fault?
YES:Adjust it. Then go to Step 5.
NO:Go to Step 3.
STEP 3. Check the parking break cable routing condition.
Q:Is there a fault?
YES:Correct it. Then go to Step 5.
NO:Go to Step 4.
STEP 4. Check the rear brake's shoe and lining.
Q:Is there a fault?
YES:Correct it. Then go to Step 5.
NO:Go to Step 5.
STEP 5. Check symptom.
Q:Is the malfunction eliminated?
YES:Diagnosis is complete.
NO:Recheck from Step 1.