Inspection Procedure 2

INSPECTION PROCEDURE 2: Insufficient Parking Brake Function
DIAGNOSIS
STEP 1. Check the excessive parking brake lever stroke.
Q.Is there a fault?
YES:Adjust the parking brake lever stroke or check the parking brake cable routing. Then go to Step 7.
NO:Go to Step 2.
STEP 2. Check the parking brake cable sticking.
Q:Is there a fault?
YES:Replace it. Then go to Step 7.
NO:Go to Step 3.
STEP 3. Check the worn brake lining.
Q:Is there a fault?
YES:Replace it. Then go to Step 7.
No:Go to Step 4.
STEP 4. Check the grease or oil on lining surface.
Q:Is there a fault?
YES:Replace it. Then go to Step 7.
NO:Go to Step 5. Go to Step 7.
STEP 5. Check the stuck wheel cylinder.
Q:Is there a fault?
YES:Replace it. Then go to Step 7.
NO:Go to Step 6.
STEP 6.Check the auto adjuster malfunction.
Q:Is there a fault?
YES:Replace it. Then go to Step 7.
NO:Go to Step 7.
STEP 7.Check symptom.
Q:Is the malfunction eliminated?
YES:Diagnosis is complete.
NO:Recheck from Step 1.