Idler Pulley - Installation

INSTALLATION





1. Position the idler pulley (2) on the engine.
2. Install the idler pulley bolt (1). Tighten to 20 Nm (15 ft. lbs.).




3. Install the bolt cover (1) on the idler pulley.




NOTE: If a dowel rod was inserted into the accessory drive belt tensioner, remove rod.

4. Rotate the belt tensioner counterclockwise and install the accessory drive belt over the idler pulley.
5. Carefully release the belt tensioner and remove the wrench.




6. Install and properly route the accessory drive belt. Operation.